Hello Herman, thank you for your help.Is it just the remaining 8 pins to test individually?Is the test carried out like the test for the Bias Current,...

I have noticed some crackle sound coming of the Input Sensitive Control, could some switch cleaner resolve this, I can also see some, what looks like ...

A good day to you Herman,I was quite surprised with the results of the dc voltage at the relay, 22.67 – 23.10 vdc after 3 minutes of activation the vo...

A good day to you Herman, we have a few light snow showers here temp 1.2°c time 1pm.I needed a meter to test the Philips Blue Electrolytic Capacitors...

Thank you Herman for the word of caution; I wasn’t going to try that :idea:Remi; I have been thinking about the presents of ac at the relay; do you t...

Thank you Remi for clarifying probe connections, I will quote, “measure the bias current through the three amps as it is right now” on Monday, please ...

That’s very helpful Remi; yes I can see how you made the adjustment from the solder side, if you look at the other side of the board it looks like you...

Hello Remi and thank you for your help;Turning the Input Sensitive Control (No 5) one way you can hear a small amount of sound and turning it the othe...

Hello Herman; and thank you for your support.Relay: In September I checked the working voltage: - With no voltage until the red Operating neon indicat...

Chart of Blue Electrolytic Capacitors

New Philips Blue Electrolytic Capacitors fitted and Relay